top of page

Publications

GETEC Profile

​

A. Book

  1. Hung Vu Xuan; Modeling of Exterior Rotor Permanent Magnet Machines with Concentrated Windings. TU Delft Publisher, 2012. 250 pages. ISBN 9789088914690. Available: http://repository.tudelft.nl/view/ir/uuid%3A27bb59c4-14c8-45fe-9284-28363b46e060/

 

B. Conference and Journal Papers

  1. Hung Vu Xuan; Lahaye, D.; M.J.; Polinder, H.; Ferreira, J.A.; “Influence of stator slotting on the performance of permanent magnet machines with concentrated windings,” IEEE Transactions on Magnetics, 48, issue.99, doi: 10.1109/TMAG.2012.2212025. The link.

  2. Hung Vu Xuan; Polinder, H.; Lahaye, D.; Ferreira, J.A., “Modeling for the design of fractional slot PM machines with concentrated windings protected from demagnetization during three-phase short circuit,”Energy Conversion Congress and Exposition (ECCE), 2012 IEEE, vol., no., pp.1276,1283, 15-20 Sept. 2012, doi: 10.1109/ECCE.2012.6342669. Print ISBN:978-1-4673-0802-1.

  3. Hung Vu Xuan; Ani, S. O.; Lahaye, D.; Polinder, H.; Ferreira, J. A.; , “Validation of non-linear dynamic FEM model for design of PM machines with concentrated windings in ship application,” Power Electronics and Applications (EPE 2011), Proceedings of the 2011-14th European Conference on , vol., no., pp.1-9, Aug. 30 2011-Sept.1 2011. Birmingham, UK. E-ISBN: 978-90-75815-15-3. Print ISBN: 978-1-61284-167-0.

  4. Hung Vu Xuan; Lahaye, D.; Ani, S. O.; Polinder, H.; Ferreira, J. A.; , “Electrical generators for maritime application,” Electrical Machines and Systems (ICEMS), 2011 International Conference on , vol., no., pp.1-6, 20-23 Aug. 2011, Beijing, China. doi: 10.1109/ICEMS.2011.6073526.

  5. Hung Vu Xuan; Lahaye, D.; Polinder, H.; Ferreira, J. A.; , “Influence of slot/pole number combination on performances of permanent magnet machines with concentrated windings for ship application,” Electrical Machines and Systems (ICEMS), 2011 International Conference on, vol., no., pp.1-6, 20-23 Aug. 2011, Beijing, China. doi: 10.1109/ICEMS.2011.6073667.

  6. Hung Vu Xuan; Lahaye, D.; Ani, S.O.; Polinder, H.; Ferreira, J.A.; , “Effect of design parameters on electromagnetic torque of PM machines with concentrated windings using nonlinear dynamic FEM,” Electric Machines & Drives (IEMDC), 2011 IEEE International, vol., no., pp.383-388, 15-18 May 2011, Canada. doi: 10.1109/IEMDC.2011.5994625.

  7. Hung Vu Xuan; Lahaye, D.; Polinder, H.; Ferreira, J.A.; , “Improved model for design of permanent magnet machines with concentrated windings,” Electric Machines & Drives (IEMDC), 2011 IEEE International , vol., no., pp.948-954, 15-18 May 2011, Canada. doi: 10.1109/IEMDC.2011.5994943.

  8. Hung Vu Xuan; Lahaye, D.; Hoeijmakers, M.J.; Polinder, H.; Ferreira, J.A.; , “Studying rotor eddy current loss of PM machines using nonlinear FEM including rotor motion,” Electrical Machines (ICEM), 2010 XIX International Conference on, vol., no., pp.1-7, 6-8 Sept. 2010. Rome, Itali. doi: 10.1109/ICEM MACH.2010.5608045.

  9. Hung Vu Xuan; Lahaye, D.; Hoeijmakers, M.J.; Polinder, H.; Ferreira, J.A.; , “Modeling magnetic saturation for the design of exterior rotor permanent magnet machines,” Power Electronics Conference (IPEC), 2010 International, vol., no., pp.1299-1305, 21-24 June 2010, Sapporo, Japan. doi: 10.1109/IPEC.2010.5543387.

  10. Hung Vu Xuan; Lahaye, D.; M.J.; Polinder, H.; Ferreira, J.A.; “An efficient method for analysis and design of PM machine in a flywheel,” Sixth IEEE Young Research Symposium in Electrical Power Engineering; Delft, The Netherlands, 16-17April, 2012.

  11. Hung Vu Xuan; Lahaye, D.; M.J.; Polinder, H.; Ferreira, J.A.; , “Thermal model for an exterior rotor permanent magnet machine with concentrated windings in a flywheel,”.

  12. Hung Vu Xuan; Lahaye, D.; M.J.; Polinder, H.; Ferreira, J.A.; “Modeling, measurement and comparison of fractional slot PM machines with concentrated windings in small-scale ship application.”

  13. Hung Vu Xuan; Design and manufacture of supervision, measurement and control system for CNC wound winding machine based on PSoC technology; Journal of Communications and Transport Science, Vietnam; March 2008. Available: http://www.scribd.com/doc/97241741/Design-and-Manufacture-Supervision-Measure-and-Control-System-for-CNC-Winding-Hung-Vu-Xuan

  14. Hung Vu Xuan; Position control system using servo three phases Induction motor – Design of the interface for supervision and control; Communications and Transport Science Journal, Vietnam; N0.18, March 2007, pp.53-60. Available: http://www.scribd.com/doc/97272153/Position-Control-using-Servo-Motor-Vu-Xuan-Hung-published-in-2007

  15. Hung Vu Xuan, Tran Van Thinh; Solutions to improve effective and efficient operation of inverter – three-phase induction motor system; Communications and Transport Science Journal, Vietnam, N0.16, Dec 2006, pp.87-92. Available: http://www.scribd.com/doc/97271599/Improve-Efficiency-of-inverter-induction-motor-UCT-2006-Hung-Vu-Xuan

  16. Hung Vu Xuan, Tran Van Thinh, Ho Manh Tien; Direct stator flux and torque control (DSFTC) of a three-phase induction motor using space vector modulation; The 16th conference of Communication and Transport Science; Communication and Transport Science Journal; Vietnam, N0.12, Nov 2005, pp 147-152. Available: http://www.scribd.com/doc/97240092/DTC-2colum-5-Paper-published-2005

  17. Hung Vu Xuan, Tran Van Thinh; Analysis, synthesis and simulation of the field oriented control FOC – Rotor time constant identification; Communication and Transport Science Journal, Vietnam, No.10, March 2005; pp 83-88. Available: http://www.scribd.com/doc/88357564/Syntheses-and-Simulations-Method-for-Field-Oriented-Vector2005-Hung-Vu-Xuan

  18. Hung Vu Xuan, Tran Van Thinh; Influence of the control strategy on performances of an induction motor fed by inverter, including skin face effect and magnetic saturation; Scientific Journal of Technology Universities, Vietnam, pp.1-5, 2005. Available: http://www.scribd.com/doc/97242539/Influence-of-Inverter-Control-Algorithm-on-Induction-Motor-Hung-Vu-Xuan

  19. Hung Vu Xuan and others; Design of soft-starter for induction motors, Proceedings of a conference in University of Communications and Transport, Hanoi, Vietnam, pp.1-5, 2005. Available: https://www.scribd.com/doc/88356970/Design-of-softstarter-for-induction-motors-Hung-Vu-Xuan-2005

  20. Hung Vu Xuan; Tran Van Thinh; Using inverter to control AC motors; Scientific conference of improving efficient using energy; Hanoi University of Technology, Hanoi, Vietnam, 5th Nov 2003. Available: http://www.scribd.com/doc/97273275/Using-inverters-to-control-AC-motors-Bai-Bao-Hoi-Thao-HUT-Nov-2003

  21. Hung Vu Xuan; Calculation of energy loss of an induction motor during transient operation supplied by PWM inverter; Communication and Transport Science Journal, Vietnam, No.5, Nov 2003, pp 112-117. Available: http://www.scribd.com/doc/97241022/Energy-yield-of-PWM-inverter-induction-motor-published-in-2003

  22. Hung Vu Xuan; Automated design optimization of rectifier transformers; Proceedings of student scientific research, Hanoi University of Science and Technology, Vietnam, 2000.

 

C. Selected Presentations and Reports

  1. Hung Vu Xuan; Building wind turbine factory, presentation at the conference on Wind Energy in Vietnam, HoChiMinh city, November 2015. Available at: http://player.slideplayer.com/27/8980954/#

  2. Hung Vu; Wind turbine in Vietnam: potentials, opportunities and challenges. Available at: the link

  3. Hung Vu; Choice of clean electric power plants for Vietnam. Available at: the link

  4. Hung Vu Xuan; Lahaye, D.; Polinder, H.; Ferreira, J.A.; Influence of stator slotting on the performance of permanent magnet machines with concentrated windings; Report 12-9, ISSN 1389-6520, Reports of the Department of Applied Mathematical Analysis, Delft University of Technology, Delft 2012. Available at: Link to the report.

  5. Hung Vu Xuan; Eddy current distribution in rotor of permanent magnet generators using 3D transient FEM. Available at: the link.

  6. Hung Vu Xuan; 3D transient FEM and lumped parameter thermal models for permanent magnet machines. Available at: the link.

  7. Hung Vu Xuan; An Efficient Method for Analysis and Design of Permanent Magnet Machines with concentrated windings, presentation available at: the link.

  8. Hung Vu Xuan; Power electronics converters and control systems; presentation is available at: the link.

 

Note: All of my IEEE papers can be found in the IEEE Xplore Digital Library, the link.

Reference: http://metis.tudelft.nl:7777/pls/metis_lookup/pk_apa_n.results?p_url_id=5403&p_onderzoekernummer=1081571

Contact me on LinkedIn

​

bottom of page